4 Replacement Procedures 4.5 HDD
4.5 HDD
CAUTION: When handling the HDD, do not press the top surface as shown by the arrow.
Hold it by the sides.
Removing the HDD
To remove the HDD, follow the steps below and refer to Figure 4-5 to 4-7.
1. Turn the computer upside down.
2. Loosen the following screws and remove the HDD cover while releasing latches.
• M2.5×10B FLAT HEAD screw ×2
HDD cover
M2.5×10B FLAT HEAD
Figure 4-5 Removing the HDD cover
4-12 [CONFIDENTIAL] TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
To Next Page
Loading...
