Toshiba Tecra A8 - Cover Latch

4 Replacement Procedures 4.26 Cover latch
4.26 Cover latch
Removing the Cover latch
To remove the cover latch, follow the steps below and refer to Figure 4-41.
1. Remove the latch knob while pushing three hooks.
2. Remove the latch hook. Be careful not lose the spring.
Latch knob
Latch hook
Spring
Hook
Hook
Figure 4-41 Removing the cover latch
Installing the Cover latch
To install the cover latch, follow the steps below and refer to Figure 4-41.
1. Install the latch hook while engaging it to the hook.
2. Set the latch knob and push it until the hooks are engaged.
4-62 [CONFIDENTIAL] TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)