4.21 Battery lock 4 Replacement Procedures
4.21 Battery lock
Removing the Battery lock
To remove the battery lock, follow the steps below and refer to Figure 4-30.
1. Remove the following screw securing the battery lock.
• M2.5×6C Tapping screw ×1
2. Make the switch of the battery lock on the back of the base assembly locked and
remove the battery lock while releasing hooks.
Battery lock
Hook
M2.5×6C Tapping
Figure 4-30 Removing the battery lock
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 4-49
To Next Page
Loading...
