4.22 HDD cable 4 Replacement Procedures
4.22 HDD cable
To remove the HDD cable, follow the steps below and refer to Figure 4-31.
1. Peel off the insulator and disconnect the HDD cable from the connector CN1850 on
the system board.
HDD cable
CN1850
Insulator
Figure 4-31 Removing the HDD cable
Installing the HDD cable
To install the HDD cable, follow the steps below and refer to Figure 4-31.
1. Connect the HDD cable to the connector CN1850 on the system board and stick the
insulator.
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 4-51
To Next Page
Loading...
