4 Replacement Procedures 4.14 SD card slot
4.14 SD card slot
Removing the SD card slot
To remove the SD card slot, follow the steps below and refer to Figure 4-23.
1. Remove the following screw and SD card slot.
• M2×5B FLAT HEAD screw ×1
2. Disconnect the SD card slot cable from the SD card slot.
SD card slot
SD card slot cable
M2.5×5B FLAT HEAD
Figure 4-23 Removing the SD card slot
Installing the SD card slot
To install the SD card slot, follow the steps below and refer to Figure 4-23.
1. Connect the SD card slot cable to the SD card slot.
2. Install the SD card slot to the slot and secure it with the following screw.
• M2×5B FLAT HEAD screw ×1
4-38 [CONFIDENTIAL] TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
To Next Page
Loading...
