Toshiba Tecra A8 - LCD Unit;Fl Inverter

4.25 LCD unit/FL inverter 4 Replacement Procedures
4 Replacement Procedures
4.25 LCD unit/FL inverter
Removing the LCD unit/FL inverter
To remove the LCD unit/FL inverter, follow the steps below and refer to Figure 4-37 to 4-40.
1. Open the display and make it flat.
2. Remove the keyboard cover while releasing latches. (In the case of removing LCD
before the keyboard)
3. Remove the mask seals and following screws securing the LCD mask.
• M2.5×6B FLAT HEAD screw ×2
4. Remove the LCD mask while releasing the latches.
LCD mask
M2.5×6B FLAT HEAD
M2.5×6B FLAT HEAD
Mask seal
Figure 4-37 Removing the LCD mask
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 4-57