4.30 Speaker 4 Replacement Procedures
4.30 Speaker
Removing the Speaker
To remove the speaker, follow the steps below and refer to Figure 4-45 and 4-46.
1. Turn up two insulators and peel off two acetate tapes.
2. Remove the speakers from the slots.
Speaker (left)
Insulator
Speaker (right)
cetate tape
Speaker cable (black&red)
Speaker cable (white&green)
Figure 4-45 Removing the speaker (1)
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 4-73
To Next Page
Loading...
