4 Replacement Procedures 4.29 Hinge
4-72 [CONFIDENTIAL] TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Installing the Hinge
To install the hinge, follow the steps below and refer to Figure 4-44.
1. Install the right hinge while engaging two hooks and secure it with the following
screw.
• M2.5×6C Tapping screw ×1
2. Install the left hinge and secure it with the following screw.
• M2.5×6C Tapping screw ×1
3. Turn the cover assembly face up and secure the left hinge with the following screw.
• M2.5×4B FLAT HEAD screw ×1
To Next Page
Loading...
