4 Replacement Procedures 4.24 PC card slot
4.24 PC card slot
Removing the PC card slot
To remove the PC card slot, follow the steps below and refer to Figure 4-36.
1. Remove the following screws securing the PC card slot.
• M2×3C S-THIN HEAD screw ×2
• M2×8C S-THIN HEAD screw ×2
2. Remove the PC card slot while releasing latches.
M2x3C S-THIN HEAD
PC card slot
M2x8C S-THIN HEAD
Figure 4-36 Removing the PC card slot
Installing the PC card slot
To install the PC card slot, follow the steps below and refer to Figure 4-36.
1. Install the PC card slot and secure it with the following screws.
• M2×3C S-THIN HEAD screw ×2
• M2×8C S-THIN HEAD screw ×2
4-56 [CONFIDENTIAL] TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
To Next Page
Loading...
