4 Replacement Procedures 4.9 Wireless LAN card
4-26 [CONFIDENTIAL] TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Installing the Wireless LAN card
To install the wireless LAN card, follow the steps below and refer to Figure 4-14.
1. Insert slantingly the wireless LAN card into the connector CN2600 on the system
board.
CAUTION: Insert the slits of the wireless LAN card according to the guide of the slot.
2. Gently push the wireless LAN card down and secure it with the following screw.
• M2×3C BIND screw ×1
3. Seat the wireless LAN card cover in place and secure it with the following screw.
• M2×4B BIND or Security torx screw ×1
4. Connect the wireless LAN antenna cables (black and white) to the connectors on the
wireless LAN card.
To Next Page
Loading...
