4 Replacement Procedures 4.10 Cover assembly
4. Turn the computer face down and remove the following screws on the bottom.
• M2.5×5B FLAT HEAD screw ×1 (“5” in the figure below)
• M2.5×6B FLAT HEAD screw ×11 (“6” in the figure below)
• M2.5×10B FLAT HEAD screw ×3 (“10” in the figure below)
• M2.5×16B FLAT HEAD screw ×3 (“16” in the figure below)
“6”
“6”
“6”
“6”
“6”
“16”
“16”
“16”
“10”
“5”
“6”
“10”
“6”
“6”
“6”
“6”
“6”
“10”
Figure 4-16 Removing the cover assembly (2)
4-28 [CONFIDENTIAL] TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
To Next Page
Loading...
