4 Replacement Procedures 4.11 SW membrane
2. Push down the hook and slide the SW membrane in the direction in the figure below.
3. Remove the SW membrane.
SW membrane
Hook
Figure 4-19 Removing the SW membrane
Installing the SW membrane
To install the SW membrane, follow the steps below and refer to Figure 4-18 and 4-19.
1. Install the SW membrane to the slot while sliding it in the opposite direction in
removing.
2. Install the switch cover while engaging latches.
4-32 [CONFIDENTIAL] TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
To Next Page
Loading...
