4.31 Fluorescent Lamp 4 Replacement Procedure
4.31.2 Replacing the 15.4-inch WXGA Samsung Fluorescent Lamp
To replace the 15.4-inch WXGA Samsung fluorescent lamp, follow the steps below and refer
to figures 4-55 to 4-58.
Removing the fluorescent lamp
1. Remove the PCB cover.
CAUTION: Handle with care not to damage COF of S/D ICs.
PCB cover
Figure 4-55 Replacing Samsung fluorescent lamp (WXGA) (1)
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573) [CONFIDENTIAL] 4-87
To Next Page
Loading...
