48
Getting Started
Recovering the Internal Storage Drive
When you create a recovery drive (USB flash), only the
operating system files and drivers originally shipped with
the computer are backed up to the USB flash drive and
can be restored from this drive. Any files that you created
are not backed up on the recovery drive. You will need to
separately back up the files you created; for more
information, see “Backing up your work” on page 69.
To create a recovery drive:
1 Connect a USB flash drive to your computer.
2 In the
Search field, type TOSHIBA Recovery Media
Creator
.
3 Click
TOSHIBA Recovery Media Creator.
A message may appear asking you to allow this app to
make changes to your PC. Click the
Yes button.
All information stored on your USB flash drive will be
erased during the process of creating the recovery drive.
Be sure to save the information stored on your USB flash
drive to another storage computer before executing this
procedure.
4 Click
Create.
A prompt appears stating, “The Recovery USB media
will be created now. Please insert a USB flash drive...”
The size of the required USB flash drive will vary,
minimum 16GB, depending upon your system.
5 Click
OK to continue.
A prompt appears stating, “The USB flash drive will be
formatted.”
6 Click
OK to continue.
This may take a few minutes.
A pop-up window appears when the
TOSHIBA
Recovery Media Creator process is complete.
NOTE
NOTE
To Next Page
Loading...
Need help?
General
