49
Getting Started
Recovering the Internal Storage Drive
7 Click OK to finish.
8 Click
Close to close the TOSHIBA Recovery Media
Creator.
A message appears asking, “Would you like to free up
drive space by deleting the HDD recovery data?”
9 Click
OK to delete the HDD recovery data, or Cancel to
abort the process without deleting the HDD recovery
data.
10 If you selected
OK in step 9 to delete the HDD data, a
message appears warning, “If you remove the HDD
recovery data, you will not be able to create the System
Recovery media again. Are you sure you want to
continue?”
11 Click
OK again to agree to remove the HDD recovery
data.
You will see the message, “The HDD recovery data has
been removed and the new Windows partition D: has
been created.”
12 Click
OK to finish.
You will be asked to format the disk.
13 If you wish to format the disk, click the
Format disk
button.
14 Click
Start to format the Start button.
15 Click
OK when prompted to format the disk.
16 Click
OK when completed.
17 Click
Close to close the Format utility.
For information on using the recovery drive you have created
with the preceding steps, see “Restoring from recovery
media created by TOSHIBA Recovery Media Creator” on
page 50.
To Next Page
Loading...
Need help?
General
