E6581818
- 1 -
Introduction
Thank you for purchasing the “EtherCAT
®
option (IPE003Z)” for TOSVERT VF-MB1/S15
drive. Before using EtherCAT
®
module, carefully read this function manual in order to
completely and correctly utilize its excellent performance.
This option needs the option adaptor to connect VF-S15 which type form is SBP009Z.
Please match here and buy it when SBP009Z is not at hand yet.
After reading this function manual, please keep it handy for future reference.
For details of its general handling, see an instruction manual attached with the option
unit.
- TOSVERT VF-MB1 Instruction Manual·························································E6581697
- TOSVERT VF-S15 Instruction Manual··························································E6581611
- TOSVERT VF-MB1/S15 communication option Precautions Manual··········· E6581739
- TOSVERT VF-MB1 Communication Function Instruction Manual················ E6581726
- TOSVERT VF-S15 Communication Function Instruction Manual················· E6581913
- VF-S15 Option Adapter Instruction Manual···················································E6581838
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff
Automation GmbH, Germany.
Profile
The VF-MB1/S15 supports CiA
®
402 V3 drive profile, using CoE(CANOpen Over
EtherCAT)
BECKHOFF
®
software
The VF-MB1/S15 communication card supports BECKHOFF software TwinCAT
®
V2.x
with CodeSys V2.
Further reading
Recommended literature for further reading
EtherCAT Technology Group (ETG), see “www.ethercat.org”
To Next Page
Loading...
Need help?
General