Toshiba TOSVERT VF-MB1 - Page 136

E6581697
F-16
6
1) 0-10Vdc voltage input adjustment (VIA, VIB terminals)
 Point settings adjust the
frequency command for the
voltage input.
 Gradient and bias can be set
easily.
/
100 (%)
10V voltage signal
/
0 ( Hz)
/
0 (%)
0
/
50/60 (Hz)
Frequency commnd


2) 4-20mAdc current input adjustment (VIC terminal)
 Point settings adjust the frequency
command for the current input.
 Ramp and bias can be easily set.
 With a current input of 0 to 20 mA,
set  to .

100 (%)
20mA current signal

0 ( Hz)

20 ( %)
4mA

50/60 (Hz)
Frequency commnd
3) -10-+10 Vdc voltage input adjustment (VIB terminal)
 Point settings adjust the
frequency command for
the voltage input.
 Ramp and bias can be
easily set.




f213


Forward run
Reverse run