E6581697
F-50
6
6.15.7 Reverse-run prohibition
f311 : Reverse-run prohibition
Function
This function prevents the motor from running in the forward or reverse direction when it receives the
wrong operation signal.
[Parameter setting]
Title Function Adjustment range Default setting
f311
Reverse-run prohibition
0: Forward/reverse run permitted
1: Reverse run prohibited
2: Forward run prohibited
0
6.16 Droop control
f320 : Droop gain
f323 : Droop insensitive torque band
f324 : Droop output filter
Function
Droop control has the function of preventing loads from concentrating at a specific motor because of
a load imbalance when multiple inverters are used to operate one machine.
These parameters are used to allow the motor to “slip” according to the load torque current. Using
these parameters, the insensitive torque band and the gain can be adjusted.
[Parameter setting]
Title Function Adjustment range Default setting
f320 Droop gain 0.0-100.0 (%) 0.0
f323 Droop insensitive torque band 0-100 (%) 10
f324 Droop output filter 0.1-200.0 100.0
To Next Page
Loading...
