E6581697
F-39
6
■ An example of setting when f302=1
[When power is interrupted]
[If momentary power failure occurs]
+
The time for which the operation of the motor
can be continued depends on the machine
inertia and load conditions. Before using this
function, therefore, perform verification tests.
+Use with the retry function allows the motor to
be restarted automatically without being
brought to an abnormal stop.
Motor speed
About 100ms～10s
Input voltage
Coasting stop
Note
4: If power is interrupted during deceleration stop, power ride-through
control will not be performed.
Internal DC
voltage level
Regenerative power
ride-through control selection
Motor speed
In
ut volta
e
Note 5: If power is interrupted during deceleration stop, power ride-
throu
h control will not be
erformed.
Internal DC
voltage level
Normal acceleration
To Next Page
Loading...
