E6581697
D-4
4
Standard setting mode : The mode changes to the Standard setting mode when
the EASY key is pressed and "" is displayed.
Both basic and extended all parameters are displayed.
Basic parameters : This parameter is a basic parameter for the
operation of the inverter.
Refer to chapter 5 for details.
Refer to section 11.2 for parameter tables.
Extended parameters : The parameters for detailed and special
setting.
Refer to chapter 6 for details.
Refer to section 11.3 for parameter tables.
Note) Refer to section 11.8 for unchangeable parameters in running.
To Next Page
Loading...
