Toshiba TOSVERT VF-MB1 - Page 93

E6581697
D-16
4
[How to select parameters]
Select the desired parameters as easy setting mode parameters 1 to 32 ( to ). Note that parameters
should be specified by communication number. For communication numbers, refer to Table of parameters.
In easy setting mode, only parameters registered to parameters 1 to 32 are displayed in order of registration.
The values of the default settings are shown in the table below.
[Parameter setting]
Title Function Adjustment range Default setting

Easy setting mode parameter 1 0-2999
（）

Easy setting mode parameter 2 0-2999
（）

Easy setting mode parameter 3 0-2999
（）

Easy setting mode parameter 4 0-2999
（）

Easy setting mode parameter 5 0-2999
（）

Easy setting mode parameter 6 0-2999
（）

Easy setting mode parameter 7

Easy setting mode parameter 8

Easy setting mode parameter 9

Easy setting mode parameter 10

Easy setting mode parameter 11

Easy setting mode parameter 12

Easy setting mode parameter 13

Easy setting mode parameter 14

Easy setting mode parameter 15

Easy setting mode parameter 16

Easy setting mode parameter 17

Easy setting mode parameter 18

Easy setting mode parameter 19

Easy setting mode parameter 20

Easy setting mode parameter 21

Easy setting mode parameter 22

Easy setting mode parameter 23

Easy setting mode parameter 24

Easy setting mode parameter 25

Easy setting mode parameter 26

Easy setting mode parameter 27

Easy setting mode parameter 28

Easy setting mode parameter 29

Easy setting mode parameter 30

Easy setting mode parameter 31
0-2999
(Set by communication number)

(No function)

Easy setting mode parameter 32 0-2999
（）
Note: If any number other than communication numbers is specified, it is regarded as  (no function assigned).