Toshiba TSL3000E Series - Page 87

– 86 –
INTERFACE MANUAL
STE 85457
4.12 Example of Controller Operation, Using External Signals
(1) Normal operation sequence
POWER (I)
SYS_RDY (O)
SV_RDY (O)
EX_SVON (I)
SVOFF (I)
SVON_1a (O)
~ SVON_COM
Program selection (I)
STROBE (I)
ACK (O)
RUN (I)
CYCLE (I)
STOP (I)
AUTORUN (O)
CYC_END (O)
 To include a delay time of 2.5 seconds or over between the EX_SVON signal
ON and the RUN signal ON, set ON the RUN signal only after the SV_RDY
signal is ON.
Approx. 2.5 sec.


