30/68
It is extremely important that all parts are placed
perpendicular to each other.
9. Press the DOWN button to lower the flange plate.
10. Press the UP button to release the pressure. Make sure the
flange plate is in its starting position.
11. Lift the tyre with two people. Your tyre is ready for use.
5. Tyre disassembly
A. Standard solid tyres (non-clip)
1. Select the cage and, in the case of a standard tyre, a support plate of the correct size.
2. Place the support plate in the centre of the solid tyre press.
3. Place the tyre in the centre of the support plate.
4. Press the DOWN button to release the tyre from the rim.
To Next Page
Loading...