32/68
18. Place the extra tool on the cone.
19. Press the DOWN button.
20. Press out the rim.
21. Press the UP button to release the pressure. Make sure the
flange plate is in its starting position.
22. Remove everything on the solid tyre press piece by piece.
B. Press-on tyres
1. Centre the push ring.
2. Place the plate on the push ring.
3. Place the used tyre on the plate.
4. Use plenty of tyre grease on the inside of the new tyre.
5. Place the new tyre on top of the old one.
6. Press the DOWN button to lower the flange plate.
To Next Page
Loading...