Software
80
TOX_Manual_Process-monitoring-unit_CEP400T_en
Field Meaning
4 Main menu OK The counter reading is displayed in the
main menu when the checkbox is acti-
vated.
5 Main menu total The counter reading is displayed in the
main menu when the checkbox is acti-
vated.
6 Message at OK The number of the OK parts reached at
which a stored yellow message is issued
on the display. Value 0 deactivates the
function.
7 Message at total The number of the total parts reached at
which a stored yellow message is issued
on the display. Value 0 deactivates the
function.
8 Switch-off at OK The number of the OK parts reached at
which the working process is ended and
a stored red message is issued on the
display.
9 Switch-off at total The number of the total parts reached at
which the working process is ended and
a stored red message is issued on the
display.
10 Accept The settings are applied.
The window will close.
Job counter - Switch-off at OK
A limit value can be entered in the input field Switch-off at OK. Once the
counter value reaches the value, the 'Ready' signal is switched off and an
error message is issued.
Tapping on the Reset button resets the counter. After that, the next mea-
surement can be continued.
The value 0 deactivates the corresponding option. The system is not shut
down and no message is issued.
ü The user is logged in with a suitable user level. The necessary write
permissions are available.
ü Menu ''Lot size \ Job counter'' is open
1. Tap on the Switch-off at OK input field.
w The numerical keyboard opens.
2. Enter the desired value and confirm with ↲.
Value 0 deactivates the function.
To Next Page
Loading...