Software
TOX_Manual_Process-monitoring-unit_CEP400T_en
81
Reset ''Switch-off at OK'' counter
1. When the limit value in input field ''Switch-off at OK''has been reached:
2. Reset the counter by tapping on the Reset button.
3. Start process again.
Job counter - Switch-off at total
A limit value can be entered in the input field Switch-off at total. As soon
as the counter value reaches the value, a warning message is issued.
The value 0 deactivates the corresponding option. The system is not shut
down and no message is issued.
ü The user is logged in with a suitable user level. The necessary write
permissions are available.
ü Menu ''Lot size \ Job counter'' is open
1. Tap on the Switch-off at total input field.
w The numerical keyboard opens.
2. Enter the limit value and confirm with ↲.
Value 0 deactivates the function.
Reset ''Switch-off at total'' counter
1. When the limit value in input field ''Switch-off at total'' has been
reached:
2. Reset the counter by tapping on the Reset button.
3. Start process again.
To Next Page
Loading...