Software
TOX_Manual_Process-monitoring-unit_CEP400T_en
93
The function of an input or output is described in plain text.
Activating or deactivating output
ü The user is logged in with a suitable user level. The necessary write
permissions are available.
ü Menu ''Supplement -> In-Outputs | Field bus I/O'' is opened.
è Tap on the button below the desired input or output.
u The field changes from red to green or green to red.
u The input or output is activated or deactivated.
u The change becomes effective immediately.
u The change remains effective until the ''Field bus'' menu is exited.
Change byte
ü The user is logged in with a suitable user level. The necessary write
permissions are available.
ü Menu ''Supplement -> In-Outputs | Field bus I/O'' is opened.
è Tap the cursor button at the top edge of the screen.
u The byte changes from ''0'' to ''15'' or reverse.
BYTE Bit BYTE Bit
0 0 - 7 8 64 - 71
1 8 - 15 9 72 - 79
2 16 - 23 10 80 - 87
3 24 - 31 11 88 - 95
4 32 - 39 12 96 - 103
5 40 - 47 13 104 - 111
6 48 - 55 14 112 - 119
7 56 - 63 15 120 - 127
Setting Date/Time
In the ''Supplement -> Date/Time'' menu, the device time and device date
can be configured.
To Next Page
Loading...