Toyota 2GR-FE - Remove Crankshaft Timing Sprocket;Gears and no 2 Chain

EM–76
2GR-FE ENGINE MECHANICAL – ENGINE UNIT
EM
34. REMOVE CRANKSHAFT TIMING SPROCKET
(a) Remove the crankshaft timing sprocket from the
crankshaft.
(b) Remove the 2 pulley set keys from the crankshaft.
35. REMOVE CAMSHAFT TIMING GEARS AND NO. 2
CHAIN (for Bank 1)
(a) While raising the No. 2 chain tensioner, insert a pin
of φ 1.0 mm (0.039 in.) into the hole to fix the No. 2
chain tensioner.
(b) Hold the hexagonal portion of the camshaft with a
wrench, and remove the 2 bolts and 2 camshaft
timing gear assemblies.
NOTICE:
• Be careful not to damage the cylinder head
with the wrench.
• Do not disassemble the camshaft timing gear
assemblies.
(c) Remove the No. 2 chain.
36. REMOVE NO. 2 CHAIN TENSIONER ASSEMBLY
(a) Remove the bolt and No. 2 chain tensioner.
A109720
Push
Pin
Plunger
A120651E01
Turn
Hold
A120652E01
A109721