304
3-2. Using the audio system
Auto connection
To turn auto connection mode on, set “Bluetooth* Power” to on.
(→P. 308)
When you register a phone, auto connection will be activated. Always
set it to this mode and leave the Bluetooth
®
phone in a place where a
connection can be established.
When the “POWER” switch is turned to ACCESSORY or ON mode, the
system will search for a nearby cellular phone you have registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is displayed.
Manual connection
When auto connection has failed or “Bluetooth* Power” is turned off,
you must connect the Bluetooth
®
device manually.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Follow the steps in “Connecting a Bluetooth
®
device” from
“STEP 1”. (→P. 303)
Connecting a Bluetooth
®
audio player
Registering an additional device
Select “Select Device” on the Bluetooth
®
audio control
screen.
For more information: →P. 300
Selecting a registered device
Select “Select Device” on the Bluetooth
®
audio control
screen.
For more information: →P. 303
STEP
1
STEP
1
STEP
2
STEP
1
STEP
2
To Next Page
Loading...
Need help?
General
