350
3-2. Using the audio system
Voice command system
Using the voice command system
Press the talk switch.
To cancel the voice command
system, press and hold the talk
switch.
After a beep sounds, say the desired command.
On the list screen, you can select the desired command.
The voice command system enables the hands-free system to be
operated using voice commands.
Operations of the voice command system can be performed by
selecting the menu corresponding to each function on the screen.
Even if any menu is selected, commands displayed on all menus can
be operated.
STEP
1
■ Microphone
→P. 313
■ When using the microphone
● It is unnecessary to speak directly into the microphone when giving a
command.
● When “Voice Prompt Interrupt” set to on, it is not necessary to wait for the
confirmation beep before speaking a command. (→P. 267)
STEP
2