332
3-2. Using the audio system
Select to delete contacts from
the contact list.* (→P. 336)
Select to reset all setup
items.*
*: For PBAP compatible Bluetooth
®
phones only, this function is avail-
able when “Automatic Contact/
History Transfer” is set to off.
(→P. 331)
Update contacts from phone
Operation methods differ between PBAP compatible and PBAP
incompatible but OPP compatible Bluetooth
®
phones.
If your cellular phone is neither PBAP nor OPP compatible, the con-
tacts cannot be transferred.
■ For PBAP Compatible Bluetooth
®
Phones
Select “Update Contacts from Phone”.
Check that a confirmation screen is displayed when the oper-
ation is complete.
This operation may be unnecessary depending on the type of cellu-
lar phone.
Depending on the type of cellular phone, OBEX authentication may
be required when transferring contact data. Enter “1234” into the
Bluetooth
®
phone.
If another Bluetooth
®
device is connected when transferring contact
data, depending on the phone, the connected Bluetooth
®
device
may need to be disconnected.
Depending on the type of Bluetooth
®
phone being connected, it may
be necessary to perform additional steps on the phone.
STEP
1
STEP
2
To Next Page
Loading...
Need help?
General
