179
4
4-5. Using the driving support systems
Driving
RUSH_OM_General_OMBZ265
Reverse sensor
When you place the shift lever in the position R with the engine switch
set to IGNITION ON mode, the buzzer sounds for about one second.
The change in the buzzer sound informs the approximate distance
from the vehicle to the obstacle.
When the buzzer sounds, reduce the speed of the vehicle and beware
of the obstacles behind the vehicle. When the buzzer sound changes
from an intermittent one to a continuous one, it means that the dis-
tance between the rear bumper of your vehicle and the nearest obsta-
cle behind your vehicle is less than 0.5 meters. Immediately stop your
vehicle.
The reverse sensors detect an obstacle behind the vehicle when
reversing and a buzzer sound informs the driver and those
around the vehicle of the presence of an obstacle.
Position of the sensors
KBTE450104
Use and operation of reverse sensors
Change in buzzer sound when the vehicle approaches an obstacle
Approximate distance from
vehicle to obstacle
Buzzer sound
1.3 meter to 1.0 meter Intermittent sound with long interval
1.0 meter to 0.5 meter Intermittent sound with short interval
0.5 meter or less Continuous sound
To Next Page
Loading...
