70
1-2. Child safety
RUSH_OM_General_OMBZ265
■
Installation with ISOFIX rigid anchor (ISOFIX child restraint
system)
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
Place the second seat at the
4th lock or middle* position
from the rear most position.
(→P. 123)
4th lock or middle* posi-
tion
Rear most position
*: Mass group 0
+
and the size
class is C
Adjust the seat back to 3rd or
1st* lock position from the
most upright position.
(→P. 123)
Most upright position
3rd or 1st* lock position
*: Mass group 0
+
and the size
class is C
If the child seat cannot be installed due to interference between
the head restraint and the child seat, set the head restraint to the
upper most position or remove it. (→P. 127)
1
1
2
KBTE110712E
2
1
2
3
To Next Page
Loading...
