306
7-2. Steps to take in an emergency
RUSH_OM_General_OMBZ265
Tighten down the towing eyelet
securely using a wheel nut
wrench or hard metal bar.
Securely attach cables or chains to the towing eyelet.
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the engine.
If the engine does not start, turn the engine switch to IGNITION ON mode.
Shift the shift lever to N and release the parking brake.
Vehicles with an automatic transmission: When the shift lever can-
not be shifted: →P. 162
■ While towing
If the engine is not running, the power assist for the brakes and steering will
not function, making steering and braking more difficult.
■ Wheel nut wrench
The wheel nut wrench is installed in under the front left seat. (→P. 320)
KBTE820110
4
5
6
7
To Next Page
Loading...
