73
1-2. Child safety
1
For safety and security
RUSH_OM_General_OMBZ265
■
Fixing the top strap to the anchor bracket
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
Adjust the head restraint to the upmost position.
If the head restraint interferes with the child restraint system or top strap
installation and the head restraint can be removed, remove the head
restraint. (→
P. 127)
Latch the hook onto the
anchor bracket and tighten
the top strap.
Make sure the top strap is
securely latched. (→P. 63)
Hook
Top strap
Anchor bracket
When installing the child
restraint system with the head
restraint being raised, be sure to
have the top strap pass under-
neath the head restraint.
1
2
1
2
3
■ When installing a child restraint system
Observe the following precautions.
Failure to do so may result in death or serious injury.
● Firmly attach the top strap and make sure that the belt is not twisted.
● Do not attach the top strap to anything other than the anchor bracket.
● After securing a child restraint system, never adjust the seat.
● Follow all installation instructions provided by the child restraint system
manufacturer.
● When installing the child restraint system with the head restraint being
raised, after the head restraint has been raised and then the anchor
bracket has been fixed, do not lower the head restraint.
To Next Page
Loading...
