TP-Link AC2100 - Control Leds

100
Chapter 16
Administrate Your Network
16. 2. Control LEDs
The router‘s LEDs indicate router’s activities and status. You can turn on or turn off the
LEDs either from the web management page or by pressing the LED button.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set
for the router.
2. Go to Advanced > System Tools > LED Control.
• To turn on/off LEDs
Toggle on or off the LED Status to turn on or off the LEDs.
• To set up Night Mode
1. Enable Night Mode.
2. Specify a time period in the Night Mode Period as needed.
3. Click Save, and then the LEDs will be off during this period.