TP-Link AC2100 - Wireless Settings; Specify Basic Wireless Settings

85
Chapter 15
Specify Your Network Settings
Note:
If you have created an interface group, you can configure IPv6 LAN settings for the default interface group only.
1 ) Select the DHCPv6 Server address type to make the modem router assign
IPv6 addresses to hosts.
2 ) Specify the Starting/Ending IPv6 Address for the IPv6 suffixes. The modem
router will generate IPv6 addresses within the specified range.
3 ) Keep Address Lease Time as the default value.
4 ) Keep Site Prefix Type as the default value Delegated. If your ISP has provided a
specific IPv6 site prefix, select Static and enter the prefix.
5 ) Keep WAN Connection as the default value.
4. Click Save to make the settings effective.
15. 3. Wireless Settings
15. 3. 1. Specify Basic Wireless Settings
The modem router’s wireless network name (SSID) and password, and security option
are preset in the factory. The preset SSID and password can be found on the product
label. You can customize the wireless settings according to your needs.
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Basic > Wireless page.