47
Chapter 4
Configure the Router in Wireless Router Mode
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > Security > Access Control:
3. Select the access mode to either block (recommended) or allow the device(s) in the
list.
To block specific device(s):
1 ) Select Blacklist and click SAVE .
2 ) Click Add and select devices you want to block. You can see the devices have
been added to the blacklist.
To allow specific device(s):
1 ) Select Whitelist and click SAVE.
To Next Page
Loading...
