63
Chapter 4
Configure the Router in Wireless Router Mode
3. Click SAVE .
4. 10. 10. LED Control
The LED of the router indicates its activities and status. You can enable the Night Mode
feature to specify a time period during which the LED is off.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > System > LED Control.
3. Enable Night Mode.
4. Specify the LED off time, and the LED will be off during this period every day.
Note: The effective LED off time is based on the time of the router. You can go to Advanced > System > Time &
Language to modify the time.
5. Click SAVE .
To Next Page
Loading...
