EasyManua.ls Logo

TP-Link Archer C54 - Remote Management

TP-Link Archer C54
103 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57
Chapter 4
Configure the Router in Wireless Router Mode
2. Click Add Device.
3. Click VIEW CONNECTED DEVICES and select the device to manage the router from
the Connected Devices list, or enter the MAC address of the device manually.
4. Specify a Description for this entry.
5. Click SAVE .
4. 10. 5. Remote Management
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > System > Administration, and focus on the Remote Management
section.
Note:
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use this feature because
private addresses are not routable.
Forbid all devices to manage the router remotely:
Do not tick the Enable checkbox of Remote Management.
Allow all devices to manage the router remotely:

Other manuals for TP-Link Archer C54

Related product manuals