Figure 5-30
Settings:
See each other - If Allow guests to see each other is selected, anyone who connects to the
guest network can access each other.
Access my local network - If Allow guests to access my local network is selected,
anyone who connects to the guest network has access to your local network, not just Internet
access.
Wireless:
Wireless radio – Check the box to enable this function. The guest network function is
disabled by default.
Name (SSID) - Create a name for the guest network. When setting up a Guest network, it is
strongly recommended to use a name that easily distinguishes it from your primary network.
The default name is TP-LINK_Guest_5GHz. If you want to hide the guest network from the
Wi-Fi network, check the Hide SSID.
Se cur ity - It’s strongly recommended to select WPA/W P A2 Pe r so nal. If you do not want to
use wireless security, choose No Security.
Ve rsion
-You can choose the version of the WPA-PSK/WPA2-PSK security by selecting
Auto , WPA-PSK or WPA2-PSK. The default setting is WPA2-PSK.
Encryption
- You can choose the encryption by selecting Aut o , TKIP or AES.
Wireless Password - Create a password for the guest network. The password must have a
minimum of 8 characters in length.
Click Save button to save the settings.
55
To Next Page
Loading...
