SIP ALG Enable- To allow SIP clients and servers to transfer data across NAT, turn on the
switch.
Click Save button to save these settings.
PassThrough M AC Add re ss
M AC Add re ss –This field displays the MAC address which is allowed to pass through the
modem router
Modify – Delete this entry, you can click the icon.
To add a new entry, please follow the steps below.
1. Click the Add button and the next screen will pop-up as shown below.
2. Enter the M AC Add r e ss.
3. Click OK button to save these settings.
5.7 USB Settings
Figure 5-48
There are three submenus under the USB Settings menu: Disk Se t tin gs, Folde r Sharing and
Print Server. Click any of them, and you will be able to configure the corresponding functions.
5.7.1 Disk Settings
Choose menu “Adv anced
Disk Settings”, you can configure the USB disk
drive attached to the modem router and view the information.
70
To Next Page
Loading...
