TP-Link Archer CR700

Archer CR700
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Figure 5-29
Step 4: “Device has been added successfully!” will appear on the screen, which means the
client device has successfully connected to the modem router.

Note:
1) The WPS LED on the modem router will light green for five minutes if the device has been
successfully added to the network.
2) The WPS function cannot be configured if the Enable Router’s PIN switch is off. Please
make sure the Enable Router’s PIN switch is on before configuring the WPS.
5.5.3 Guest Network
Choose menu “Adv anced
→
Wireless 5G
→
Guest Network”, you can configure the advanced
settings of your guest network.
54