Figure 5-51
2. Click the
Add button and the next screen will pop-up as shown below.
Figure 5-52
3. Select the volume desired to share from the Volume drop-down list. Then click the Browse
button to select the folder path. You can create a share name, e.g. image.
4. Select the checkboxes in Figure 5-52.according to your needs.
Enable Authentication - If this checkbox is selected, then the folder sharing needs
authentication.
Write Access - If this checkbox is selected, then the sharing folder is allowed write access.
Enable Media Sharing - Select this checkbox to enable media sharing.
5. Click OK to complete the settings.
5.7.3 Print Server
Please refer to Section 4.5.2 Print Server.
74
To Next Page
Loading...
