Figure 5-66
Account Management:
Here you can set the account user information about Old Password, Ne w Password and
Confirm Password.
It is strongly recommended that you should change the factory default user name and password of
the router, because all users who try to access the router's Web-based utility or Quick Setup will
be prompted for the router's default user name and password.
Note:
Enter the new Password twice to confirm it. The level of the new password’s security will be shown
on the screen as Low, Middle or High.
Click the Sav e button save the settings.
Re mote Config Management:
Re mote Config Management – Check the Enable to enable the remote management.
Click the Sav e button save the settings.
89
To Next Page
Loading...
