101
connect the wireless network?
¾ If you fail to find any wireless network, follow the steps below:
1. Make sure the wireless function is enabled if you’re using a laptop with built-in
wireless adapter. You can refer to the relevant document or contact the laptop
manufacturer.
2. Make sure the wireless adapter driver is installed successfully and the wireless
adapter is enabled. You can refer to the relevant document or contact the wireless
adapter manufacturer.
¾ If you can find other wireless network except your own, follow the steps below:
1. Check the Wi-Fi LED indicator on your wireless router/modem;
2. Make sure your computer/device is still in range of your router/modem. Move closer
if you are currently too far away.
3. Go to Basic > Wireless page, and check the wireless settings, double-check your
Wireless Name (SSID) is not hidden.
4. Connect to wireless network.
¾ If you can find your wireless network but fail to connect, follow the steps below:
1. Authentication problem: Network Security Key Mismatch.
1 ) Sometimes you will be asked to type in a PIN number when you connect to
the wireless network for the first time. This PIN number is different from the
Wireless Password/Network Security Key, usually you can only find it on the
label of your router.
2 ) If you cannot find the PIN or PIN failed, you may choose “Connecting using
a security key instead”, and then type in the Network Security Key/Wireless
Password;
To Next Page
Loading...
