TP-Link JetStream T2700G-28TQ - Page 381

369
The following entries are displayed on this screen:

Current Role
Role: Displays the role the current switch plays in the cluster.

Cluster management-vlan
VLAN ID: Enter the cluster management-vlan id.

Role Change
Individual:
Select this option to change the role of the switch to be individual
switch.
Commander:
Select this option to change the role of the switch to be
commander switch, and then configure the cluster:

Cluster Name: Configure the name of the current cluster the
switch belongs to.

IP Pool & Mask: Configure the private IP range of the member
switches in the cluster.
 For a commander switch, the following page is displayed.
Figure17-14 Cluster Configuration for Commander Switch
The following entries are displayed on this screen:

Current Role
Role: Displays the role the current switch plays in the cluster.

Role Change
Candidate:
Select this option to change the role of the switch to be candidate
switch.