TP-Link JetStream T2700G-28TQ - Page 382

370

Cluster Config
Hold Time: Enter the time for the switch to keep the cluster information.
Interval Time: Enter the interval to send handshake packets.
 For a member switch, the following page is displayed.
Figure17-15 Cluster Configuration for Member Switch
The following entries are displayed on this screen:

Current Role
Role: Displays the role the current switch plays in the cluster.

Cluster management-vlan
VLAN ID: Enter the cluster management-vlan id.

Role Change
Individual:
Select this option to change the role of the switch to be individual
switch.