TP-Link TL-SL2210 - 1.4.2 Special Characters; 1.4.3 Parameter Format

8
1.4.2 Special Characters
You should pay attentions to the description below if the variable is a character string:
 These six characters ” < > , \ & can not be input.
 If a blank is contained in a character string, single or double quotation marks should be used,
for example ’hello world’, ”hello world”, and the words in the quotation marks will be identified
as a string. Otherwise, the words will be identified as several strings.
1.4.3 Parameter Format
Some parameters must be entered in special formats which are shown as follows:
 MAC address must be enter in the format of xx:xx:xx:xx:xx:xx
 One or several values can be typed for a port-list or a vlan-list using comma to separate. Use
a hyphen to designate a range of values, for instance, 1,3-5,7 indicates choosing 1,3,4,5,7.