TP-Link TL-SL2210 - Chapter 2 User Interface; Enable; Enable Password

9
Chapter 2 User Interface
enable
Description
The enable command is used to access Privileged EXEC Mode from User
EXEC Mode.
Syntax
enable
Command Mode
User EXEC Mode
Example
If you have set the password to access Privileged EXEC Mode from User EXEC
Mode:
TL-SL2428>enable
Enter password：
TL-SL2428#
enable password
Description
The enable password command is used to set the password for users to
access Privileged EXEC Mode from User EXEC Mode. To return to the default
configuration, please use no enable password command.
Syntax
enable password password [secret {simple | cipher} ]
no enable password
Parameter
password —— super password，which can contains 16 characters at most,
composing digits, English letters and underdashes only. By default, it is empty.
simple | cipher —— The way of displaying p
assword in configuration file. By
default, it is “simple”. This function is not supported by TL-SL2210.
Command Mode
Global Configuration Mode